Standard Sonde 33kHz
- SKU:
- 00.09.90.00.005/SON
- UPC:
- MPN:
- Weight:
- 1.00 KGS
MSRP:
Now:
£282.92
Was:
— You save
Frequently bought together:
Description
The Standard Sonde combines compact size with a strong signal and is rugged enough for most applications unless a smaller size, greater depth or for tracing ferrous pipelines is required (please ring to discuss alternatives).
Construction: High impact ABSDimensions: 4.13 in x 1.5 in (10.5cm x 3.9 cm)Operating Frequency: 33kHz Signal: ContinuousDepth Range: 16 feet (5 m)
Batteries: 1 x AA (LR6) 1.5 V alkaline - 20 hours life, continuous use
Operating Temp: +5ºF to +122ºF (-15ºC to +50ºC)
Submersion Level: 66 ft. (2 bar pressure) (20 m water)
Thread: M10 male
Related Products


512R Drain Tracer Kit C/W 512Hz Sonde
MSRP:
Now:
£433.89
Was:
The Wardsflex 512R Drain Tracer Kit comes complete with 512T Sonde, Receiver, and both types of necessary batteries.
This equipment is ready to go from opening the good quality transport and...
00.09.01.00.512/LTR


HD1 Full Package CCTV System with built in 512Hz Sonde
MSRP:
£1,072.45
Now:
£995.48
Was:
The HD1 CCTV system is a full package High Definition Pipe Surveying Camera System with 1280*720 pixels colour screen for great visual experience.
This is a simple system to operate and a low-cost...
00.16.01.00.023/CTV


Wardsflex 512T Sonde (512Hz) C/W Batteries
Wardsflex
MSRP:
Now:
£70.19
Was:
512T Sonde is set at 512Hz and comes complete C/W Batteries
It is designed with an M10 male fitting to fit most types of rods using the appropriate adaptor
00.09.01.00.512/WSO

Replacement Batteries for 512T Sonde (Pack of 2)
MSRP:
Now:
£0.91
Was:
Pack of two button batteries for the 512T Sonde.
00.15.00.02.044/BAT

1/2" BSP Male Jetting Nozzle C/W M10 fitting for Sonde
MSRP:
Now:
£42.81
Was:
1/2" BSP Male Jetting Nozzle C/W M10 fitting for Standard Sonde
Includes 10mm bonded washer
PLEASE STATE FLOW AND PRESSURE OF JETTER IN 'ORDER COMMENTS' WITH ORDER...
00.12.00.10.000/MJN
Customers Also Viewed


512R Drain Tracer Kit C/W 512Hz Sonde
MSRP:
Now:
£433.89
Was:
The Wardsflex 512R Drain Tracer Kit comes complete with 512T Sonde, Receiver, and both types of necessary batteries.
This equipment is ready to go from opening the good quality transport and...
00.09.01.00.512/LTR

Radiodetection C.A.T.4+
MSRP:
Now:
£748.81
Was:
C.A.T.4+ 50Hz Cable Avoidance Tool used for tracing Sonde or Flexitrace in drains or sewers to establish the route and depth of the drain run in addition to identifying the location of a problem if...
00.09.90.00.000/CAT

6mm x 80m Pipe Tracer (Flexitrace)
MSRP:
Now:
£457.24
Was:
Pipe Tracer (Flexitrace) Rod provides a lightweight and compact solution for locating ducts, pipes and drains. The unit can easily be transported and deployed by one person and provides an...
00.03.06.00.080/FTR

Genny4
MSRP:
Now:
£607.80
Was:
The new Genny4 with integrated logic design provides a simultaneous dual-frequency signal output design.
Alongside the familiar 33kHz locate signal for general purpose tracing, the Genny4 transmits...
00.09.90.00.000/GEN


Ridgid NaviTrack Scout® Locator
Ridgid
MSRP:
Now:
£1,741.18
Was:
The NaviTrack Scout Locator is designed to solve the most demanding remote transmitter (sonde) locates using multi-directional locating technology. Easier Locates The NaviTrack Scout...
00.16.00.00.000/NTC

1/2" BSP Female Jetting Nozzle C/W M10 fitting for Sonde
MSRP:
Now:
£39.38
Was:
1/2" BSP Female Jetting Nozzle C/W M10 fitting for Standard Sonde
Includes 10mm bonded washer
PLEASE STATE FLOW AND PRESSURE OF JETTER IN 'ORDER COMMENTS' WITH ORDER...
00.12.00.10.000/FJN

Smoke Pellets (6 x 13g per tube)
MSRP:
Now:
£7.27
Was:
Smoke Pellets are typically used in the drainage industry to either identify the source of, or to rule out drain odour problems within or adjacent to surrounding properties.
6 x 13g pellets per tube...
00.15.00.06.000/SPE

Socket Holder
MSRP:
Now:
£23.20
Was:
A heavy duty tool that engages with ferrules to enable rods to be pulled and withdrawn from pipes & drains
00.01.05.00.000/SHO